Condition: Used Stryker Wright Medical Charlotte 7.0 Compression Screw Tray Assembly 4418-0070 Included in the Sale Compression Screws 7.0 mm: 44180060 – Compression Screw 7.0 mm 44180065 – Compression Screw 7.0 mm 44180030 – Compression Screw 7.0 mm 44180055 – Compression Screw 7.0 mm 44180025 – Compression Screw 7.0 mm 44180050 – Compression Screw 7.0 mm 44180046 – Compression Screw 7.0 mm 44180040 – Compression Screw 7.0 mm Additional Instruments: 1806-3035 – Screwdriver Shaft 44180015 – Drill Guide 44180020 – Drill Guide 44180035 – Drill Bit 44180035 – Drill Bit Important Regulatory Notice
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration (FDA) and state and local regulatory agencies.
If applicable, do not purchase this item unless you are an authorised purchaser. Verification may be required prior to dispatch.
Buyer Responsibility
Any commissioning, calibration, certification, and validation required prior to clinical use is the sole responsibility of the buyer.
Disclaimer
Regardless of the origin of the equipment or any identification appearing upon it, this equipment is not certified or recommended by the seller for any specific use.
The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated with the use of this equipment.
By purchasing this item, the buyer acknowledges and agrees to these terms.

The Wright Medical Charlotte 7.0 Multi-Use Compression Screw System is an orthopaedic implant and instrument system designed for use in foot and ankle surgical procedures. Manufactured by Wright Medical Technology, Inc. (now part of Stryker), the Charlotte system provides surgeons with a comprehensive solution for achieving stable compression fixation across osteotomy and arthrodesis sites.

The 7.0 mm cannulated compression screw is intended for use in procedures requiring large-fragment fixation in foot and ankle surgery, including hindfoot and midfoot arthrodesis. The multi-use instrument tray (Assembly No. 4418-0070) provides a complete, organised set of reusable surgical instruments required to implant the Charlotte 7.0 mm compression screw.

Key Features:
- 7.0 mm cannulated compression screw design for large-fragment foot and ankle fixation
- Multi-use reusable instrument tray with dedicated labelled slots for each instrument
- Includes cannulated drill, cannulated countersink, cannulated tap, and threaded K-wires for guided implantation
- Parallel drill guide for accurate screw trajectory
- 2.5 mm distractor for intraoperative joint or osteotomy site manipulation
- Quick connect handle system for efficient instrument interchange
- Depth gauge for accurate screw length measurement
- Straight and oblique washer options for varied fixation requirements
- Autoclavable sterilisation tray with perforated base and secure latching lid
- CE marked medical device
- Manufacturer: Wright Medical Technology, Inc. (a Stryker company)
- Tray Assembly Number: 4418-0070

Indications for Use:
- Hindfoot arthrodesis
- Midfoot arthrodesis
- Calcaneal osteotomy fixation
- Foot and ankle reconstructive procedures requiring 7.0 mm cannulated compression screw fixation

Note: All reusable instruments must be cleaned, inspected, and sterilised in accordance with the manufacturer's instructions for use prior to each clinical application. The sale and clinical use of this instrument set may be subject to regulation by national health authorities including the FDA and MHRA.